Bullard Police Badge with Silver Eagle-Top Shield and Black Textured Field
Polished silver police badge for Bullard, Texas, die-struck as an upright eagle-top shield with a full-relief eagle crest, a silver laurel-wreath border around the lower shield and a fine-grained matte black field. A round seal at the center carries a blue enamel ring reading THE STATE OF TEXAS in silver letters around a silver star inside a laurel wreath, flanked by small leaf sprays. Silver banners read OFFICER across the top, BULLARD TX beneath it and POLICE across the lower shield in black fill, and a blank silver number plate sits at the base.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Bullard Police Department insignia, serving the city of Bullard, Texas, which straddles the line between Smith and Cherokee Counties south of Tyler. It is an eagle-top shield badge struck in polished silver with a black textured field, built around a blue enamel seal reading THE STATE OF TEXAS.
Shape & Base: The badge is die-struck as an upright shield with a full-relief eagle across the top, its wings spread over both shoulders. A silver laurel-wreath border frames the lower two-thirds of the shield, and the field inside it is finished in a fine-grained matte black so the polished banners and seal stand off a dark ground.
Center: A round seal sits at the heart of the shield with a blue enamel ring reading THE STATE OF above and TEXAS below in silver letters, around a silver five-point star inside a laurel wreath. Small silver leaf sprays flank the seal on both sides against the black field.
Ring & Banner Lettering: OFFICER arcs across a raised silver banner beneath the eagle in black-filled letters. A second banner beneath it reads BULLARD TX, a third across the lower shield reads POLICE, both in the same fill, and a plain silver plate at the base is left blank for a badge number.
Enamel & Tonal Detail: Blue enamel in the seal ring is the only bright color on the badge. The black textured field does the rest of the work, throwing the silver eagle, banners, wreath and plate into high contrast so every polished element reads as a separate raised piece.
Finish Quality: Die-struck in solid metal with a polished silver plating, hand-finished so the black texture strikes evenly across the field and the banner edges hold a clean line against it. For the sheriff’s office serving Cherokee County, see the Cherokee County Sheriff badge.
Specifications
| Metal Badge | |
| Eagle-Top Shield Badge | |
| Die-Struck Metal | |
| Polished Silver | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a custom metal badge like the Bullard Police design?
Yes. Owl Badges produces custom die-struck metal badges for police departments, sheriff’s offices, and constable offices nationwide. You can order this silver eagle-top shield as shown or change the seal, the banner wording, the rank line, and the field finish to fit your own department. Badges carrying a real agency name require credential verification before production.
What is the minimum order for a police badge like this?
There is a low minimum order. Single badges are available for individual officers, and per-piece pricing drops sharply as quantity rises, which makes larger runs practical for an entire department or a promotion cycle at once.
Why is the plate at the base blank, and what can go on it?
Yes. The plate at the base of this badge is struck blank so each officer’s number can be engraved after plating, which keeps one die serving the whole department. We can engrave the numbers before shipping, strike a fixed number into the die for a single badge, or replace the plate with a rank word or a date.
How much does a custom metal badge like this cost?
Estimated pricing runs from about $150 each at a single piece down to roughly $50 each at higher volumes. There is no setup fee and no mold fee. Final pricing depends on the finished design, size, and quantity, and is confirmed with a free quote.
How long does production take?
Approximately 8 to 14 weeks for tooling, striking, enamel fill, plating, and finishing after your proof is approved. The black field is applied after plating and masked off every polished element, so the finishing stage runs a little longer than it does on a plain silver badge.
Do I need credentials to order a badge with the Bullard Police name on it?
Yes. Metal badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Bullard police buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. Custom or fictional department designs, and designs where you substitute your own agency name, are welcome without that step.
