Clarksville Police Badge with Two-Tone Oval, Flying Eagle and US Flag
Two-tone police badge for Clarksville, Texas, die-struck as an upright oval with a lined gold rim, X-shaped accents and a gold radiating sunburst field. A silver eagle in full flight fills the upper field above a large waving United States flag in enamel that spans the middle of the badge, with a round silver seal disc over the flag lettered STATE OF around the top and a silver star inside a laurel wreath at its heart. Silver banners read POLICE across the top and CLARKSVILLE and TEXAS across the lower oval in black fill, and a blank silver plate sits at the base.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Clarksville Police Department insignia, serving the city of Clarksville, Texas, the seat of Red River County in the northeast corner of the state. It is a two-tone oval badge with a gold body and silver banners, built around a silver flying eagle above a single waving United States flag that spans the middle of the face.
Shape & Base: The badge is die-struck as an upright oval with a lined gold rim, small X-shaped accents at the top and sides, and a face cut as a radiating sunburst with fine lines fanning outward from behind the eagle. A blank silver plate closes the base beneath the banners.
Center: A silver eagle in full flight fills the upper field, wings spread wide and talons reaching down toward the flag. Across the middle, a waving United States flag in enamel runs nearly rim to rim, and a round silver seal disc sits over its center, lettered STATE OF around the top with a silver star inside a laurel wreath at its heart and further lettering around the base of the disc.
Ring & Banner Lettering: POLICE arcs across a raised silver banner at the top of the oval in black-filled letters. Two silver banners across the lower oval read CLARKSVILLE and TEXAS in the same fill, with curled ribbon ends at each side.
Enamel & Tonal Detail: The flag is the only enamel on the badge, its blue canton and white stars filling the left half and its red and white stripes waving across the right. The two-tone split puts the eagle, the seal, the three banners and the plate in silver against the gold rim and sunburst, so the flag reads as a band of color between silver above and silver below.
Finish Quality: Die-struck in solid metal with two-tone gold and silver plating, hand-finished so the eagle feathers stay crisp and the enamel follows every fold of the flag. For another city police department in the same county, see the Bogata Police badge.
Specifications
| Metal Badge | |
| Oval Badge | |
| Die-Struck Metal | |
| Two-Tone Gold and Silver | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a custom metal badge like the Clarksville Police design?
Yes. Owl Badges produces custom die-struck metal badges for police departments, sheriff’s offices, and constable offices nationwide. You can order this two-tone oval style as shown or change the eagle, the flag, the seal, the banner wording, and the plating split to fit your own department. Badges carrying a real agency name require credential verification before production.
What is the minimum order for a police badge like this?
There is a low minimum order. Single badges are available for individual officers, and per-piece pricing drops sharply as quantity rises, which makes larger runs practical for an entire department or a promotion cycle at once.
Can the single large flag be changed or a second flag added?
Yes. This badge carries a single large United States flag across the middle rather than a pair of flags at the shoulders, with the seal disc set over its center. We can keep that layout and change the flag to your state or city flag, add a second flag, or move the seal off the flag onto its own field.
How much does a custom metal badge like this cost?
Estimated pricing runs from about $150 each at a single piece down to roughly $50 each at higher volumes. There is no setup fee and no mold fee. Final pricing depends on the finished design, size, and quantity, and is confirmed with a free quote.
How long does production take?
Approximately 8 to 14 weeks for tooling, striking, enamel fill, plating, and finishing after your proof is approved. A flag this wide is filled in stages so the stars and stripes stay sharp across every fold, and the two-tone plating is masked around the silver elements afterward.
Do I need credentials to order a badge with the Clarksville Police name on it?
Yes. Metal badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Clarksville police buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. Custom or fictional department designs, and designs where you substitute your own agency name, are welcome without that step.
