El Paso County Constable Precinct 1 Badge with Blue Enamel Texas Seal and Seven-Point Gold Star
Two-tone constable badge for El Paso County, Texas, Precinct 1, built as an oval shield with a bright silver body and polished gold applied elements. The silver face carries fine radiating ray lines with X-shaped ornaments set at the top, both lower flanks, and the base. A large seven-point gold star sits at the center with engraved leaf-and-scroll filigree across every arm, overlaid by a gold ring reading CONSTABLE’S OFFICE and EL PASO COUNTY with dot separators, framing a blue enamel seal with STATE OF and TEXAS around a gold star in a laurel wreath. Gold banners across the top read CONSTABLE and PRECINCT, a small plate below the star carries the numeral 1, and a gold plate at the base reads TX.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the El Paso County Constable’s Office insignia, serving Precinct 1 of El Paso County, Texas, at the far western tip of the state where Texas meets New Mexico and Mexico. It is a two-tone oval shield badge, struck with a silver base and gold applied elements, carrying a seven-point gold star and a blue enamel State of Texas seal.
Shape & Base: An oval shield is die-struck with a bright silver body, its full face filled with fine radiating ray lines. X-shaped ornaments are set into the silver at the top edge, at both lower flanks, and at the base, breaking up the ray field at four points around the rim.
Center: A large seven-point star in polished gold sits over the middle of the shield, one point falling at bottom center and two straddling the top behind the banners, with engraved leaf-and-scroll filigree worked across every arm. A gold ring set over the star reads CONSTABLE’S OFFICE arcing across the top and EL PASO COUNTY across the bottom, separated by raised dots, and frames a blue enamel seal carrying STATE OF and TEXAS around a gold star in a laurel wreath.
Ring & Banner Lettering: Two gold banners stack across the top of the shield. CONSTABLE arcs across the upper banner with flared ribbon tails at both shoulders, and PRECINCT sits on a shorter banner directly beneath it, both in black-filled letters. A small gold plate below the star carries the numeral 1, and a gold rectangular plate at the base reads TX.
Enamel & Tonal Detail: The two-tone contrast carries the design, with the polished gold star, ring, and banners reading warm against the bright silver ray field. Blue enamel appears only in the center seal, making it the single point of color on the badge, while black enamel fills the lettering across the banners, the ring, and the base plate.
Finish Quality: Die-struck in solid metal with a two-tone gold and silver plating, hand-finished so the gold overlays sit proud of the silver shield and the engraved filigree stays crisp beneath the shine. For the same-county companion piece, see the El Paso County Sheriff metal badge.
Specifications
| Metal Badge | |
| Oval Shield Badge | |
| Die-Struck Metal | |
| Two-Tone Gold and Silver | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a custom metal badge like the El Paso County Constable Precinct 1 design?
Yes. Owl Badges produces custom metal badgees for agencies, departments, and organizations nationwide. You can order this style as shown or customize the colors, text, emblem, size, and border to fit your own agency. There is no setup fee and no minimum-quantity barrier — request a quote to get started.
What is the minimum order for a metal badge like this?
There is a low minimum order, with quantity-break pricing that starts as low as 10 pieces. Smaller runs are welcome for new departments or specialty units, and per-piece pricing drops sharply at 100, 250, 500, and 1,000 units.
Can you change the colors, text, or size on this design?
Yes. This design is a starting point. Our artwork team can adjust the emblem, lettering, colors, shape, border, and dimensions to fit your department. Submit your changes with a quote request and you will receive a free proof before any production begins.
How much does a custom metal badge like this cost?
Estimated pricing ranges from about $17 each at 10 units down to roughly $2 each at 1,000 units. There is no setup fee and no mold fee. Final pricing adjusts based on the final design, size, and quantity, and is confirmed with a free quote.
How long does production take?
Custom embroidered metal badgees take approximately 3 to 6 weeks for production and finishing after your proof is approved. Your design is confirmed before production begins, so there are no surprises.
Do I need credentials to order a metal badge with a real agency name on it?
Yes. metal badgees bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. Custom or fictional department designs, and designs where you change the name to your own, are welcome without that step.
