Dimmit County Constable Badge with Tonal Texas Seal and Antique Silver Star-in-Ring
Antique silver constable badge for Dimmit County, Texas, built as a five-point star-in-ring with ball-tipped star points and a ball finial at the top of the ring. A repeating crisscross motif runs along both edges of every star arm, and wheat sprays flank the lower sides of the ring. The center carries a tonal disc with THE STATE OF TEXAS arcing around its border, framing a large raised five-point star inside a laurel wreath with triangle accents at the sides and a cross accent below. CONSTABLE arcs across the top of the ring, DIMMIT COUNTY rides an upper ribbon banner and BIG WELLS a lower one, with 1912 struck across the base of the ring. Fully tonal throughout, with no enamel anywhere on the face.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Dimmit County Constable insignia, serving Dimmit County, Texas, in the South Texas brush country with the county seat at Carrizo Springs and the precinct seat at Big Wells. It is a five-point star-in-ring badge struck in antique silver, finished entirely tonal with no enamel anywhere on the face.
Shape & Base: A five-point star is die-struck in antique silver and set inside a circular ring, with rounded ball tips finishing each of the five points and a matching ball finial at the top of the ring. A repeating crisscross motif runs along both edges of every star arm, and wheat sprays flank the lower left and right of the ring.
Center: A circular tonal disc sits at the heart of the star, with THE STATE OF TEXAS arcing around its upper border in raised letters. Inside, a large raised five-point star is framed by a laurel wreath, with small triangle accents at either side and a cross accent struck below the wreath.
Ring & Banner Lettering: CONSTABLE arcs across the top of the outer ring in raised letters. DIMMIT COUNTY sits on an upper ribbon banner and BIG WELLS on a lower ribbon banner, while 1912 is struck across the base of the ring beneath the lower star points.
Tonal Detail: There is no enamel and no second plating tone on this badge. Every element is carried by relief alone, with the raised lettering, star, wreath, and crisscross border catching light while the recessed ground stays darkened, which gives the piece a worn, traditional character quite different from the enamel-filled designs elsewhere in the gallery.
Finish Quality: Die-struck in solid metal with an antique silver plating, hand-finished so the darkened recesses hold in the low areas while the raised surfaces are brought back up to a soft shine. For the same-county companion piece, see the Dimmit County Sheriff metal badge.
Specifications
| Metal Badge | |
| Five-Point Star-in-Ring Badge | |
| Die-Struck Metal | |
| Antique Silver | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a custom metal badge like the Dimmit County Constable design?
Yes. Owl Badges produces custom metal badgees for agencies, departments, and organizations nationwide. You can order this style as shown or customize the colors, text, emblem, size, and border to fit your own agency. There is no setup fee and no minimum-quantity barrier — request a quote to get started.
What is the minimum order for a metal badge like this?
There is a low minimum order, with quantity-break pricing that starts as low as 10 pieces. Smaller runs are welcome for new departments or specialty units, and per-piece pricing drops sharply at 100, 250, 500, and 1,000 units.
Can you change the colors, text, or size on this design?
Yes. This design is a starting point. Our artwork team can adjust the emblem, lettering, colors, shape, border, and dimensions to fit your department. Submit your changes with a quote request and you will receive a free proof before any production begins.
How much does a custom metal badge like this cost?
Estimated pricing ranges from about $17 each at 10 units down to roughly $2 each at 1,000 units. There is no setup fee and no mold fee. Final pricing adjusts based on the final design, size, and quantity, and is confirmed with a free quote.
How long does production take?
Custom embroidered metal badgees take approximately 3 to 6 weeks for production and finishing after your proof is approved. Your design is confirmed before production begins, so there are no surprises.
Do I need credentials to order a metal badge with a real agency name on it?
Yes. metal badgees bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. Custom or fictional department designs, and designs where you change the name to your own, are welcome without that step.
