Eagle Head Police Shield Patch — Order This Winged Design
Design S0999A at a glance
A navy shield inside a gold merrowed border, with an eagle head and a wing filling the center field. Three lines of lettering frame it — a name line, then police, then department — and each one restitches to your agency while the eagle stays put. Only three thread colors, so the design stays clean even at collar size.
Shield shapeGold merrowed borderEagle headWing motifThree-line lettering3 thread colors
About this eagle head and wing shield design
The eagle head is one of the most requested emblems in municipal police insignia, and this version gives it room: no seal, no ring of stars, just the head and a wing on navy twill. Navy, gold and white are the only threads, so the patch reads as two clear layers — lettering and emblem — from across a room or a parking lot.
Order it as shown or rework it: your city or township name on the top line, a division title in place of the department line, or the eagle redrawn to match the one on your badge or door decal. This page shows a design concept we manufacture to order — your stitch-ready proof arrives 6–12 hours after you order, and nothing is produced until you approve it.
Eagle head police shield patch quick facts
- Embroidered eagle head police patches cost $3.00–$20.00 each depending on quantity, with a 10-patch minimum.
- Rush production takes 7–10 days and is available on every custom patch.
- Three-color designs stitch cleaner than full-color seals, especially at collar and cap sizes.
- Department shoulder shields run 3.5" to 4.5" tall; jacket-back versions run 8" to 11".
- A gold merrowed border is the most common edge on the police shoulder shields we produce.
- Owl Badges is a US-based badge and patch manufacturer in Simi Valley, California, in business since 1999.
Customize this eagle head police patch: backing, size, and thread options
- Backing: sew-on for patrol shirts, iron-on for caps and polos, hook-side velcro for carriers
- Sizes: 2"–12" — 4" is the usual shoulder height for this shield
- Colorways: navy, gold and white as shown, or subdued tan, OD green, wolf gray and blackout
- Border: gold merrowed (shown), or any thread color to match your uniform trim
- Thread: metallic gold available for the border and eagle highlights
- Artwork: the eagle redraws to match your department's existing emblem at no additional art charge
Who orders this design
Small-city and township police departments order this shield when they want a patch that looks traditional without copying anyone else's seal. Reserve programs and police foundations buy it for fundraising and event wear. Most orders run 4-inch sew-on for uniforms, with a short velcro batch for outer carriers.
Custom eagle head police patch pricing — embroidered
| Quantity | Price per patch |
|---|---|
| 10–19 | $20.00 |
| 20–29 | $14.00 |
| 30–49 | $11.00 |
| 50–74 | $6.50 |
| 75–99 | $6.00 |
| 100–249 | $5.50 |
| 250–499 | $3.00 |
Rush production in 7–10 days is available on all custom patches. Design your changes in the markup tool above, or get this patch quoted exactly as shown.
What your quote covers
- Your exact spec — quantity, size, backing, and colorway, priced to the piece
- A free digital mockup within 4 hours, before you commit to anything
- Rush production in 7–10 days whenever you need it
- No setup, digitizing, or art fees — the table price is the whole price
How ordering this patch works
Request a quote
Send this design (marked up or as-is) with your quantity. Quotes are answered 24/7 within 4 hours.
Approve your proof
Your stitch-ready proof arrives 6–12 hours after ordering. Nothing is produced until you approve it.
We verify & produce
Law-enforcement orders are verified with your agency before production — standard practice since 1999.
Delivery confirmed
We confirm your shipping address by phone, then email tracking the day your patches ship.
🏛 Bidding for your department or agency? We answer bids, RFQs and purchase-order quotes — see how agency bids and RFQs work, or tick “This quote is for a bid” in the quote form.
Eagle head police shield patch questions
Can the three lettering lines carry our department name?
Yes. The top line takes your city, town or township name, and the two lines below restitch to your exact wording — department, division or unit. Your 4-hour mockup shows the spacing.
Can you match the eagle to the one on our badge?
Yes. Send a photo of the badge, an old patch or a decal and we redraw the eagle head and wing to match at no art charge, then show it on your proof before production.
What size do most departments order for shoulders?
4 inches tall is the common choice for this shield. Collar and cap versions run 2 to 2.5 inches, and we simplify fine feather detail on the proof if a small size needs it.
Is a subdued version available for tactical kit?
Yes — tan, OD green, wolf gray and blackout builds stitch cleanly because the eagle and wing silhouette carry the design. Preview each one in the markup tool before you quote.
How do I mark changes on this design?
Open the markup tool in the quote form, circle the parts you want changed, pin numbered notes and switch colorways. The marked-up version attaches to your quote request automatically.
Looking for a different shield, or a different starting point?
An eagle and a wing is one way to fill a shield. The police patch layouts that go beyond the eagle head and wing shield show every other design departments order from us, from K9 units to marine and campus patches. If you're still choosing between embroidered, woven and PVC, or you'd rather design from your own sketch, the custom patch guide for eagle and wing emblem builds covers materials, backings and bulk pricing first.
Notes
Drop a 📍 pin on the patch, then type what you want changed there.