Hallsville Police Badge with Gold Disc and Oversized Texas Seal
Polished gold disc metal badge for the Hallsville Police Department in Harrison County, Texas, with acanthus scrollwork at the lower corners and a foliate ornament at the base. An oversized State of Texas seal fills the face, a twisted rope ring carrying STATE OF and TEXAS around a five-point star wrapped in laurel and oak branches on a pebbled field. HALLSVILLE arcs across the raised crown panel and a wide gold banner reads POLICE across the base.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Hallsville Police Department insignia, serving the town of Hallsville, Texas, in Harrison County east of Longview. It is a round disc badge struck in polished gold, and unlike most designs where a seal sits inset at the center, here the State of Texas seal fills nearly the entire face.
Shape & Base: The badge is die-struck as a large gold disc topped by a raised arc panel, with acanthus scrollwork spreading at the lower left and right corners and a scrolled foliate ornament closing the base beneath the banner.
Crown Lettering: HALLSVILLE arcs across the raised top panel in black-filled capitals, following the curve of the disc from one shoulder to the other.
Center Seal: A twisted rope ring encircles the seal face, carrying STATE OF above and TEXAS below in raised gold capitals. Inside sits a large five-point star wrapped in laurel and oak branches on a finely pebbled field, struck deep enough that the branches cast their own shadow.
Banner: A wide gold banner crosses the base of the disc with POLICE in black-filled capitals, its ends squared off against the scrollwork at each side.
Tonal Detail & Finish Quality: The badge carries no color enamel — polished gold and black fill do all the work, with the rope ring, pebbled ground and deep seal relief supplying the contrast. Every element is die-struck for crisp definition and sealed for daily duty wear. For another design from the same county, see the Harrison County Sheriff badge.
Specifications
| Metal Badge | |
| Gold Disc Badge with Scrollwork | |
| Die-Struck Metal | |
| Polished Gold | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a round disc badge like this Hallsville design?
Yes. This Hallsville Police badge is a full disc rather than the more common oval or shield, with the seal filling nearly the whole face. That format can be reproduced exactly or adapted for your own agency, and it suits a design where a single seal carries the identity.
Can you change the seal that fills the badge face?
Yes. The oversized State of Texas seal can be replaced with your own state seal, a county or municipal seal, or a department emblem struck at the same scale. The twisted rope ring around it can stay, change to a beaded ring, or be dropped.
Can you change the lettering and scrollwork?
Yes. HALLSVILLE on the crown panel and POLICE on the base banner both take your own agency wording, and the acanthus scrollwork at the corners can be kept, simplified, or removed for a cleaner outline. You receive a free proof before any tooling begins.
Can this badge be ordered with enamel or in silver?
Yes. This design is struck fully tonal in polished gold, but the seal field, the rope ring, or the banner can take enamel color, and the whole badge can be finished in silver or two-tone. Our artwork team proofs the finish with you before tooling.
How much does a custom metal badge like this cost?
Estimated pricing ranges from about $150 each at low quantities down to roughly $50 each at higher volumes. There is no setup fee and no mold fee, and there is a low minimum order. Final pricing depends on the size, plating, and quantity, and is confirmed with a free quote.
Do I need credentials to order a Hallsville Police badge?
Yes. Metal badges bearing a real agency name such as the Hallsville Police Department are sold only to that agency or its authorized representatives. Public-safety buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production. Custom or renamed designs for your own department are welcome without that step.
