Little River-Academy Police Badge with Eagle and Flag Band
Polished silver oval metal badge for the Little River-Academy Police Department in Bell County, Texas, with sunburst rays and a POLICE OFFICER crown banner. A standing eagle sits in the upper field above a United States flag that sweeps the full width of the badge in enamel, with a red-banded STATE OF TEXAS seal at its center. Silver banners read LITTLE RIVER ACADEMY, POLICE DEPT and TX.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Little River-Academy Police Department insignia, serving the city of Little River-Academy, Texas, in Bell County south of Temple. It is a polished silver oval badge whose center is given over to the national flag, sweeping the full width of the badge in enamel.
Shape & Base: The badge is die-struck as an upright silver oval with sunburst rays fanning across the field, and a silver banner arcing across the crown carrying POLICE OFFICER in black-filled capitals.
Eagle: A standing eagle is struck in silver relief in the upper field, its wings half-raised and its head turned left, perched above the flag band with the feathering picked out row by row.
Flag Band: The United States flag sweeps the full width of the badge in full-color enamel, its blue canton and white stars at the left and its red and white stripes running to the right edge, the whole band struck with a wave through it.
Seal: A round seal is mounted at the flag’s center reading STATE OF above and TEXAS below in silver on a red band, enclosing a silver star wrapped in a wreath.
Banner Lettering & Finish Quality: Stacked silver banners cross the lower oval in black-filled capitals — LITTLE RIVER ACADEMY, then POLICE DEPT — above a base panel reading TX. The POLICE OFFICER banner takes any rank. Every element is die-struck for crisp relief, then plated in polished silver and sealed for daily duty wear. For another design from the same county, see the Bell County Sheriff badge.
Specifications
| Metal Badge | |
| Silver Oval Badge with Flag Band | |
| Die-Struck Metal | |
| Polished Silver | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a badge with a full-width flag band like this design?
Yes. This badge runs the United States flag edge to edge across its center in enamel, with a wave struck through the band so the stripes bend. Any flag can be set that way, filled color by color into separate struck recesses.
Can you put a standing eagle on the badge?
Yes. The eagle here stands with its wings half-raised rather than fully spread, perched above the flag. Standing, spread, and head-only eagle treatments all strike cleanly and can be proofed with you before tooling.
Can a hyphenated city name fit on the banner?
Yes. Longer and hyphenated names are sized to the banner width during artwork so the lettering stays legible at duty-badge scale. The banner can also be widened or the name split across two lines.
Can this badge be ordered in gold instead of silver?
Yes. This design is plated in polished silver, but the same die runs in gold or two-tone with no tooling change. The flag enamel and the seal read equally well against either finish.
How long does production take for a badge with a full flag in enamel?
Custom die-struck metal badges take approximately 8 to 14 weeks for tooling, striking, plating, enamel fill, and finishing after your proof is approved. The flag and seal are filled in the same enamel pass, so the color area adds no extra lead time.
Do I need credentials to order a Little River-Academy Police badge?
Yes. Metal badges bearing a real agency name such as the Little River-Academy Police Department are sold only to that agency or its authorized representatives. Public-safety buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production. Custom or renamed designs for your own department are welcome without that step.
