Livingston County Sheriff’s Office Badge with New York State Arms
Polished gold six-point star badge with ball-tipped points, a pebbled arm fill, a beaded border, and raised triangular panels, carrying black enamel SHERIFF, LIVINGSTON, COUNTY, and N.Y. lettering and a black enamel STATE OF NEW YORK seal medallion with the state arms struck in gold relief, for the Livingston County Sheriff’s Office.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
The Livingston County Sheriff’s Office serves Livingston County in western New York, south of Rochester, with Geneseo as the county seat. This badge carries the New York state arms at its center.
Shape & Base: A polished gold six-point star forms the body of the badge, each point capped with a ball finial. The arms carry a fine pebbled fill rather than a smooth face, a beaded border traces the full outline of the star, and a raised triangular panel is struck into each arm.
Center: A circular medallion sits at the heart of the star. A black enamel ring band carries raised gold lettering reading STATE OF across the top and NEW YORK across the bottom. Inside sits the New York state arms struck in gold relief against a black ground: a shield holding a sunrise over ships, flanked by two standing figures, with an eagle on a globe above and a ribbon carrying motto lettering below.
Banner Lettering: Four lettering zones stack down the face. A gold scroll ribbon with folded ends crosses the upper star reading SHERIFF, a curved band beneath it reads LIVINGSTON, a wider scroll with folded ends sits below the seal reading COUNTY, and a small flat plaque at the bottom point reads N.Y. Every letter is raised gold filled with black enamel.
Tonal Detail: This badge carries no color at all. Black enamel fills the four lettering zones, the seal ring band, and the ground behind the arms, and nothing else on the piece takes enamel. Working in black and gold alone puts the whole burden on relief depth, which is why the arms are struck as raised metal against a dark field rather than filled figure by figure.
Finish Quality: Polished gold carries the star, the beaded border, the triangular panels, the ball finials, the banners, and every letter, with no secondary plating tone. The pebbled fill keeps the bare metal between four lettering zones from reading flat, and the arms are struck fine enough to separate the two figures, the eagle, and the motto ribbon at badge scale without color to help them. For another gold six-point star badge with state arms at its center, see the Hancock County Sheriff’s Office badge.
Specifications
| Product Type | Metal Badge |
| Style | Six-Point Star Badge |
| Material | Die-Struck Metal |
| Plating | Polished Gold |
| Size | 2.5" - 3.5" |
| Attachment | Pin-Back with Safety Clasp |
| Packaging | Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a custom metal badge like the Livingston County Sheriff design?
Yes. Owl Badges produces die-struck metal badges for sheriff’s offices nationwide. This six-point star style can be ordered as shown, or the seal and the four lettering zones can be changed to your own county and state. There is no setup fee and no mold fee.
Can you make a badge in black and gold with no other color?
Yes. This one uses black enamel and nothing else, filling the lettering, the seal ring, and the ground behind the arms. A two-color badge like this puts the whole burden on relief depth, which suits a detailed emblem better than you might expect, and we can run the same design in silver and black if your agency issues that instead.
Can you strike state arms in relief against a dark ground?
Yes. The arms here are raised gold against black rather than filled figure by figure, which is what lets the two supporters, the eagle, and the motto ribbon read at this diameter. We can build a state, county, or organization emblem the same way. Agencies are responsible for confirming they are authorized to use a given state emblem on their badges.
How long does production take for a badge like this?
Custom metal badges take approximately 8 to 14 weeks after proof approval, covering tooling, striking, plating, and finishing. A badge with a pebbled arm fill, four lettering zones, and a relief emblem sits toward the longer end of that window, since the die carries the detail rather than the enamel. Your design is confirmed on a free proof before any tooling is cut.
How much does a custom metal badge like this cost?
Estimated pricing runs from about $150 each at single quantities down to roughly $50 each at higher volumes, with no setup fee and no mold fee. The struck texture and the relief emblem place a badge like this at the detailed end of the range, even with minimal enamel work. Final pricing is confirmed with a free quote.
Do I need credentials to order a badge with the Livingston County Sheriff name on it?
Yes. Metal badges bearing a real agency name — including the Livingston County Sheriff’s Office — are sold only to that agency or its authorized representatives, and require proof of occupation, valid credentials, or an authorized purchasing letter. If you change the seal and county name to your own, no credentials are needed.
