Bellville Police Badge with Eagle-Top Oval Shield and Black Enamel Texas Seal
Polished gold police badge for Bellville, Texas, die-struck as an upright oval crowned by a spread-wing eagle, with laurel wreath sprays running down both flanks and a small shield with a star at the base. Four gold banners read OFFICER, BELLVILLE and POLICE with a TEXAS plate at the base, all lettered in black fill. The center holds a black enamel ring reading THE STATE OF TEXAS in gold around a star framed by a gold laurel wreath, with floral relief spreading to either side.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Bellville Police Department insignia, serving the city of Bellville, Texas, the seat of Austin County west of Houston. It is an eagle-top oval shield badge struck in polished gold, with laurel wreath sprays down both flanks and a black enamel State of Texas seal.
Shape & Base: The badge is die-struck as an upright oval crowned by a spread-wing eagle, with the wings reaching out across the full width of the shoulders. Laurel wreath sprays run down both flanks of the oval, and a small shield with a star sits at the base beneath the lowest banner.
Center: A circular black enamel ring sits at the middle of the badge, carrying THE STATE OF TEXAS in gold lettering around its border. Inside it a gold star is framed by a gold laurel wreath, and floral relief spreads outward from the seal to either side.
Ring & Banner Lettering: Four gold banners cross the badge, reading OFFICER at the top, BELLVILLE beneath it, POLICE below the seal, and TEXAS on a plate at the base. All four are struck as plain gold panels with the letters filled in black.
Enamel & Tonal Detail: Black enamel is confined to the seal ring at the center, with black fill used for the banner lettering. Everything else is carried in polished gold, so the eagle, the wreath sprays, the floral relief and the base shield all read through relief alone.
Finish Quality: Die-struck in solid metal with a polished gold plating, hand-finished so the eagle feathering holds definition across its span and every leaf in the flanking wreaths keeps its edge. For the sheriff office serving the same county, see the Austin County Sheriff badge.
Specifications
| Metal Badge | |
| Eagle-Top Oval Shield Badge | |
| Die-Struck Metal | |
| Polished Gold | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a custom metal badge like the Bellville Police design?
Yes. Owl Badges produces custom metal badgees for agencies, departments, and organizations nationwide. You can order this style as shown or customize the colors, text, emblem, size, and border to fit your own agency. There is no setup fee and no minimum-quantity barrier — request a quote to get started.
What is the minimum order for a metal badge like this?
There is a low minimum order, with quantity-break pricing that starts as low as 10 pieces. Smaller runs are welcome for new departments or specialty units, and per-piece pricing drops sharply at 100, 250, 500, and 1,000 units.
Can you change the colors, text, or size on this design?
Yes. This design is a starting point. Our artwork team can adjust the emblem, lettering, colors, shape, border, and dimensions to fit your department. Submit your changes with a quote request and you will receive a free proof before any production begins.
How much does a custom metal badge like this cost?
Estimated pricing ranges from about $17 each at 10 units down to roughly $2 each at 1,000 units. There is no setup fee and no mold fee. Final pricing adjusts based on the final design, size, and quantity, and is confirmed with a free quote.
How long does production take?
Custom embroidered metal badgees take approximately 3 to 6 weeks for production and finishing after your proof is approved. Your design is confirmed before production begins, so there are no surprises.
Do I need credentials to order a metal badge with a real agency name on it?
Yes. metal badgees bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. Custom or fictional department designs, and designs where you change the name to your own, are welcome without that step.
