Brazoria Police Badge with Gold Scalloped Shield and Black Texas Seal
Polished gold police badge for Brazoria, Texas, die-struck as a scalloped shield with a notched outline, a smooth raised rim and a fine pebbled texture across the face. A round seal at the center carries a black-filled ring reading THE STATE OF TEXAS around a gold star inside a laurel wreath, with diamond marks between the words and a cross mark at the base. Raised ribbons read BRAZORIA and POLICE across the upper shield and DEPARTMENT across the lower shield, with a TEXAS plate at the base, all in black-filled lettering with no enamel on the piece.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Brazoria Police Department insignia, serving the city of Brazoria, Texas, in Brazoria County on the Gulf Coast south of Houston. It is a scalloped shield badge struck in polished gold with a pebbled field, built around a black-ringed Texas state seal with no enamel anywhere on the piece.
Shape & Base: The badge is die-struck as a scalloped shield, with a notched edge that steps in and out around the full outline and a smooth raised rim. The face is finished in a fine pebbled texture, so the polished ribbons and seal sit proud of a matte ground.
Center: A round seal sits at the heart of the shield with a black-filled ring reading THE STATE OF TEXAS around a gold five-point star inside a laurel wreath. Small diamond marks separate the words in the ring, with a cross mark at the base of the disc.
Ring & Banner Lettering: BRAZORIA arcs across the top of the shield on a raised ribbon, with POLICE on a second ribbon directly beneath it. DEPARTMENT crosses the lower shield on a third ribbon, and a plate at the base reads TEXAS, all four in black-filled letters against polished gold.
Enamel & Tonal Detail: This design carries no enamel at all. Contrast comes from the pebbled field against the polished ribbons and rim, and from the black fill in the seal ring and the four banners, which is the only color on the badge.
Finish Quality: Die-struck in solid metal with a polished gold plating, hand-finished so the pebbled texture stays even across the face and the ribbon edges hold a clean line against it. For the county seat police department in the same county, see the Angleton Police badge.
Specifications
| Metal Badge | |
| Scalloped Shield Badge | |
| Die-Struck Metal | |
| Polished Gold | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a custom metal badge like the Brazoria Police design?
Yes. Owl Badges produces custom die-struck metal badges for police departments, sheriff’s offices, and constable offices nationwide. You can order this scalloped shield style as shown or change the seal, the ribbon wording, the field texture, and the plating to fit your own department. Badges carrying a real agency name require credential verification before production.
What is the minimum order for a police badge like this?
There is a low minimum order. Single badges are available for individual officers, and per-piece pricing drops sharply as quantity rises, which makes larger runs practical for an entire department or a promotion cycle at once.
Can a badge be made with no enamel, like this one?
Yes. This badge gets its contrast from a pebbled field against polished ribbons, with black fill in the lettering and seal ring and no enamel anywhere on it. We can strike yours the same way, swap the pebbled ground for a sunburst or a smooth field, or add enamel to the seal and banners if you want color on the piece.
How much does a custom metal badge like this cost?
Estimated pricing runs from about $150 each at a single piece down to roughly $50 each at higher volumes. There is no setup fee and no mold fee. Final pricing depends on the finished design, size, and quantity, and is confirmed with a free quote.
How long does production take?
Approximately 8 to 14 weeks for tooling, striking, plating, and finishing after your proof is approved. With no enamel on this design, the fill stage drops out and the time goes into the pebbled texture, which is cut into the die and has to strike evenly across the whole face.
Do I need credentials to order a badge with the Brazoria Police name on it?
Yes. Metal badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Brazoria police buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. Custom or fictional department designs, and designs where you substitute your own agency name, are welcome without that step.
