Galveston County Constable Precinct 1 Badge with Cut-Out Gold Star and Ring Lettering
Polished gold constable badge for Galveston County, Texas, Precinct 1, built as a five-point star set inside a solid circular ring with the areas between the star arms and the ring pierced right through. The star meets the ring only at its five points and carries a raised outline around a flat interior, with EST. 1838 struck across the center in black-filled letters on two stacked lines. CONSTABLE arcs across the top of the ring and GALVESTON COUNTY PCT. 1 wraps the bottom and sides, with two small black enamel five-point stars set on the ring at the left and right shoulders. There is no state seal, wreath, or ribbon banner anywhere on the face.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Galveston County Constable’s Office insignia, serving Precinct 1 of Galveston County, Texas, on the Gulf Coast southeast of Houston with the county seat at Galveston. It is a cut-out star-in-ring badge struck in polished gold, built as open-work with no state seal, wreath, or banners anywhere on the face.
Shape & Base: A five-point star sits inside a solid circular ring, with the areas between the star arms and the ring pierced right through. The star is defined by that negative space rather than by a raised edge on a solid field, and it meets the ring only at the tips of its five points.
Center: There is no seal at the center of this badge. The star carries a raised outline around a flat interior, with EST. 1838 struck across the middle in black-filled letters on two stacked lines, marking the year Galveston County was established.
Ring & Banner Lettering: CONSTABLE arcs across the top of the ring in black-filled letters, and GALVESTON COUNTY PCT. 1 wraps around the bottom and up both sides. Two small five-point stars filled with black enamel sit on the ring at the left and right shoulders, separating the upper and lower legends.
Enamel & Tonal Detail: Black enamel is used only in the lettering and in the two small ring stars. With no seal, no wreath, and no banners competing for attention, the badge reads as the most stripped-back design in the gallery, where the pierced star and the ring text carry the whole composition.
Finish Quality: Die-struck in solid metal with a polished gold plating, hand-finished so the pierced edges around the star stay clean and the raised star outline holds a sharp line. For the same office in a different precinct and product, see the Galveston County Constable Precinct 2 patch.
Specifications
| Metal Badge | |
| Cut-Out Star-in-Ring Badge | |
| Die-Struck Metal | |
| Polished Gold | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a custom metal badge like the Galveston County Constable Precinct 1 design?
Yes. Owl Badges produces custom metal badgees for agencies, departments, and organizations nationwide. You can order this style as shown or customize the colors, text, emblem, size, and border to fit your own agency. There is no setup fee and no minimum-quantity barrier — request a quote to get started.
What is the minimum order for a metal badge like this?
There is a low minimum order, with quantity-break pricing that starts as low as 10 pieces. Smaller runs are welcome for new departments or specialty units, and per-piece pricing drops sharply at 100, 250, 500, and 1,000 units.
Can you change the colors, text, or size on this design?
Yes. This design is a starting point. Our artwork team can adjust the emblem, lettering, colors, shape, border, and dimensions to fit your department. Submit your changes with a quote request and you will receive a free proof before any production begins.
How much does a custom metal badge like this cost?
Estimated pricing ranges from about $17 each at 10 units down to roughly $2 each at 1,000 units. There is no setup fee and no mold fee. Final pricing adjusts based on the final design, size, and quantity, and is confirmed with a free quote.
How long does production take?
Custom embroidered metal badgees take approximately 3 to 6 weeks for production and finishing after your proof is approved. Your design is confirmed before production begins, so there are no surprises.
Do I need credentials to order a metal badge with a real agency name on it?
Yes. metal badgees bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. Custom or fictional department designs, and designs where you change the name to your own, are welcome without that step.
