Kirby Police Badge with Rope Border and Black Texas Seal
Polished gold oval metal badge for the Kirby Police Department in Bexar County, Texas, framed by a twisted rope border over sunburst rays. Stacked banners read POLICE, PATROLMAN and KIRBY in black-filled capitals around a black enamel ring reading THE STATE OF TEXAS with a gold star in a laurel and oak wreath. Berried foliate sprays flank the seal, and a tasseled base panel reads TEXAS.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Kirby Police Department insignia, serving the city of Kirby, Texas, a small enclave community in Bexar County east of San Antonio. It is a polished gold oval badge with a black enamel seal at its heart and a patrolman’s rank struck on the upper banner.
Shape & Base: The badge is die-struck as an upright gold oval framed by a twisted rope border running the full circumference, with sunburst rays fanning out across the field behind the banners.
Banner Lettering: Stacked gold banners with folded tails cross the oval in black-filled capitals — POLICE arcing across the crown, PATROLMAN on a banner beneath it, and KIRBY on a wide banner below the seal.
Seal: A round black enamel ring reads THE STATE OF TEXAS in gold around its circumference, enclosing a gold five-point star wrapped in a laurel and oak wreath.
Foliate Detail: Gold sprays set with small berries flank the seal at each side, their leaves struck in relief so they read against the rays fanning out behind them.
Base & Finish Quality: A gold panel at the base carries TEXAS in black-filled capitals, with tasseled cord ornaments hanging at each end. The PATROLMAN banner takes any rank. Black enamel is confined to the seal ring, set against polished gold everywhere else. Every element is die-struck for crisp relief and sealed for daily duty wear. For another design from the same county, see the Bexar County Sheriff badge.
Specifications
| Metal Badge | |
| Gold Oval Badge with Rope Border | |
| Die-Struck Metal | |
| Polished Gold | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a patrolman badge like this Kirby design?
Yes. PATROLMAN is struck on the banner beneath POLICE here, and that panel takes any rank your department uses — patrolman, officer, corporal, sergeant, chief. Departments often run one die with the rank banner varied across the order.
Can you change the rope border on this badge?
Yes. The twisted rope runs the full circumference of the oval, and it can be reproduced as shown, swapped for a laurel wreath or beaded frame, or simplified to a plain raised rim. Our artwork team proofs the change before tooling.
Can you change the seal and foliate sprays?
Yes. The black enamel THE STATE OF TEXAS ring can be swapped for your own state or municipal seal, recolored, or struck tonally, and the berried sprays flanking it can be kept, simplified, or removed.
Can the tasseled base panel be personalized?
Yes. The TEXAS panel at the base takes a different state, a badge number, or an officer name, and the tasseled cord ornaments at each end can stay as shown or be dropped for a cleaner outline.
How much does a custom metal badge like this cost?
Estimated pricing ranges from about $150 each at low quantities down to roughly $50 each at higher volumes. There is no setup fee and no mold fee, and there is a low minimum order — a short run suits a small department like Kirby’s.
Do I need credentials to order a Kirby Police badge?
Yes. Metal badges bearing a real agency name such as the Kirby Police Department are sold only to that agency or its authorized representatives. Public-safety buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production. Custom or renamed designs for your own department are welcome without that step.
