Longview Police Badge with Navy Ring and Gold Texas Seal Star
Two-tone metal badge for the Longview Police Department in Gregg and Harrison counties, Texas, with a silver oval, cross ornaments, ribbed panels and sunburst rays. A navy enamel ring reads LONGVIEW above and POLICE below in silver with gold stars at each side, around a gold star carrying a blue and gold Texas seal. POLICE OFFICER arcs across the crown above a gold TEXAS banner.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Longview Police Department insignia, serving the city of Longview, Texas, which spans Gregg and Harrison counties in the East Texas oil field. It is a two-tone badge setting a gold star and gold banners against a polished silver oval, with a navy enamel ring carrying the department name.
Shape & Base: The badge is die-struck as an upright silver oval with X-shaped cross ornaments at the four diagonals, ribbed side panels stepping in toward the center, and sunburst rays fanning across the field.
Crown Lettering: POLICE OFFICER arcs across the top of the oval in navy capitals, with gold banner ends folding down at each shoulder to close the arc.
Enamel Ring: A navy enamel ring circles the center carrying LONGVIEW above and POLICE below in silver capitals, with a small gold star set into the band at each side where the two words meet.
Center: A gold five-point star sits inside the ring with its arms beveled to bright ridges, carrying a round THE STATE OF TEXAS seal at its heart in blue and gold enamel.
Base & Finish Quality: A gold banner with rolled ends closes the badge reading TEXAS in navy. The POLICE OFFICER arc takes any rank. Every element is die-struck for crisp relief, then plated in two-tone silver and gold and sealed for daily duty wear. For another design from the same county, see the Harrison County Sheriff badge.
Specifications
| Metal Badge | |
| Two-Tone Oval Badge with Enamel Ring | |
| Die-Struck Metal | |
| Two-Tone Silver and Gold | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a badge with an enamel name ring like this Longview design?
Yes. A navy ring circles the center star here carrying LONGVIEW above and POLICE below in silver, with gold stars marking the break between them. Your own agency and city wording takes that place, sized to the curve.
Can you change the ring color and the star finish?
Yes. The ring is filled navy with silver lettering and the star is gold against a silver oval. Any of those can be recolored or reversed, and the whole badge can run in a single finish instead of two-tone.
Can you change the seal at the star’s heart?
Yes. The blue and gold THE STATE OF TEXAS seal can be swapped for your own state or municipal seal, recolored, or struck tonally so the star reads without enamel at its center.
Can you change the crown lettering and base banner?
Yes. POLICE OFFICER arcs across the crown and takes any rank, and the gold TEXAS banner at the base can carry a different state, a badge number, or an officer name. You receive a free proof before any tooling begins.
How much does a custom two-tone metal badge like this cost?
Estimated pricing ranges from about $150 each at low quantities down to roughly $50 each at higher volumes. There is no setup fee and no mold fee. Two-tone plating is included in the quote, which depends on the size, plating, and quantity.
Do I need credentials to order a Longview Police badge?
Yes. Metal badges bearing a real agency name such as the Longview Police Department are sold only to that agency or its authorized representatives. Public-safety buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production. Custom or renamed designs for your own department are welcome without that step.
