Melbourne Police Officer Badge with Florida Seal and Eagle Crest
An all-silver oval eagle-topped badge for the Melbourne Police Department on Florida’s Space Coast. A spread-winged eagle crowns the oval and its wings flow into a full silver laurel border. At the center sits a full-color Florida state seal — a Seminole woman, a sabal palm, a steamboat, and a sunrise, ringed by GREAT SEAL OF THE STATE OF FLORIDA and IN GOD WE TRUST. Stacked silver scrolls read OFFICER and MELBOURNE above the seal, a POLICE scroll curves below, and a small plate reads FLORIDA.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
The Melbourne Police Department serves Melbourne, Florida, a Space Coast city on the Indian River in Brevard County. This all-silver oval badge is crowned by a spread-winged eagle and frames a full-color Florida state seal at its center.
Shape & Base: The badge is a vertical silver oval. A spread-winged eagle perches across the top with its head turned to the side, and its wings sweep down into a full silver laurel wreath that frames the entire oval. The whole piece is die-struck in tonal silver, with the banners and central seal raised against the wreath.
Center: A round full-color Florida state seal sits at the heart of the badge. A blue ring band carries silver lettering reading GREAT SEAL OF THE STATE OF FLORIDA around the top and IN GOD WE TRUST across the bottom. Inside is the color seal scene: a Seminole woman scattering flowers, a sabal palm, a steamboat on the water, and a sunrise beyond.
Banner & Lettering: Two stacked silver scrolls sit above the seal, the upper reading OFFICER and the lower reading MELBOURNE in black block letters. A wide silver scroll curves across the lower field reading POLICE, and a small silver plate below the oval reads FLORIDA.
Silver Detail: Apart from the color seal, the badge is worked entirely in tonal silver. Die-struck relief carries the feathering of the eagle, the layered leaves of the laurel wreath, and the folded ends of each banner, while the black lettering on the silver scrolls keeps the department name sharp and legible.
Finish Quality: The badge is finished in polished silver throughout, the full-color Florida seal providing the single point of color at its center. It pairs naturally with other silver eagle-topped oval badges in the gallery, such as the Port Richey Police badge.
Specifications
| Metal Badge | |
| Oval Eagle-Top Badge | |
| Die-Struck Metal | |
| Polished Silver | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a custom metal badge like the Melbourne Police Officer design?
Yes. Owl Badges produces custom metal badgees for agencies, departments, and organizations nationwide. You can order this style as shown or customize the colors, text, emblem, size, and border to fit your own agency. There is no setup fee and no minimum-quantity barrier — request a quote to get started.
What is the minimum order for a metal badge like this?
There is a low minimum order, with quantity-break pricing that starts as low as 10 pieces. Smaller runs are welcome for new departments or specialty units, and per-piece pricing drops sharply at 100, 250, 500, and 1,000 units.
Can you change the colors, text, or size on this design?
Yes. This design is a starting point. Our artwork team can adjust the emblem, lettering, colors, shape, border, and dimensions to fit your department. Submit your changes with a quote request and you will receive a free proof before any production begins.
How much does a custom metal badge like this cost?
Estimated pricing ranges from about $17 each at 10 units down to roughly $2 each at 1,000 units. There is no setup fee and no mold fee. Final pricing adjusts based on the final design, size, and quantity, and is confirmed with a free quote.
How long does production take?
Custom embroidered metal badgees take approximately 3 to 6 weeks for production and finishing after your proof is approved. Your design is confirmed before production begins, so there are no surprises.
Do I need credentials to order a metal badge with a real agency name on it?
Yes. metal badgees bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. Custom or fictional department designs, and designs where you change the name to your own, are welcome without that step.
