Dickinson Police Badge with Silver Eagle-Top Shield and Enamel Star Seal
Polished silver police badge for Dickinson, Texas, die-struck as an upright eagle-top shield with a full-relief eagle crest, a laurel-wreath border down both sides and a fine pebbled field. A round seal at the center carries a red enamel ring around a blue enamel disc with a green enamel wreath framing a silver five-point star. Silver banners read DICKINSON and POLICE across the upper shield and DEPARTMENT across the lower shield, with a silver TX plate at the base, all in black-filled lettering.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Dickinson Police Department insignia, serving the city of Dickinson, Texas, in Galveston County between Houston and the Gulf coast. It is an eagle-top shield struck in polished silver with a laurel border, built around a full-color enamel seal with a silver star at its heart, and every banner on the badge lettered in black on silver.
Shape & Base: The badge is die-struck as an upright shield with a full-relief silver eagle across the top, its wings spread over both shoulders. A laurel-wreath border runs down each side to the pointed base, and the field inside it carries a fine pebbled texture behind the seal and banners.
Center: A round seal sits at the heart of the shield with a red enamel ring around a blue enamel disc, and inside the disc a green enamel laurel wreath frames a silver five-point star. The ring carries no lettering, so the seal reads as three bands of color around the star.
Ring & Banner Lettering: DICKINSON arcs across a raised silver banner beneath the eagle in large black-filled letters, with POLICE on a second silver ribbon below it. DEPARTMENT crosses the lower shield on a third banner in the same fill, and a silver plate at the base reads TX.
Enamel & Tonal Detail: Red, blue and green enamel in the seal are the only bright colors on the badge. The eagle, the laurel border, the pebbled field, the banners and the plate are all polished silver, with black fill in the four lines of lettering as the only other color.
Finish Quality: Die-struck in solid metal with a polished silver plating, hand-finished so the eagle feathers and laurel leaves stay crisp and the three enamel colors meet cleanly inside the seal. For the sheriff’s office serving the same county, see the Galveston County Sheriff badge.
Specifications
| Metal Badge | |
| Eagle-Top Shield Badge | |
| Die-Struck Metal | |
| Polished Silver | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a custom metal badge like the Dickinson Police design?
Yes. Owl Badges produces custom die-struck metal badges for police departments, sheriff’s offices, and constable offices nationwide. You can order this silver eagle-top shield as shown or change the seal colors, the banner wording, and the plating to fit your own department. Badges carrying a real agency name require credential verification before production.
What is the minimum order for a police badge like this?
There is a low minimum order. Single badges are available for individual officers, and per-piece pricing drops sharply as quantity rises, which makes larger runs practical for an entire department or a promotion cycle at once.
Can the seal colors be changed or lettering added to the ring?
Yes. The seal on this badge is three concentric enamel colors, a red ring, a blue disc and a green wreath, around a plain silver star with no lettering in the ring. We can match those colors to your department, strike lettering into the ring before filling, or replace the seal with your own city, county or state seal from artwork you supply.
How much does a custom metal badge like this cost?
Estimated pricing runs from about $150 each at a single piece down to roughly $50 each at higher volumes. There is no setup fee and no mold fee. Final pricing depends on the finished design, size, and quantity, and is confirmed with a free quote.
How long does production take?
Approximately 8 to 14 weeks for tooling, striking, enamel fill, plating, and finishing after your proof is approved. The three seal colors are filled and leveled one at a time so the boundaries stay sharp, and the badge goes to polish once the fill has cured flat.
Do I need credentials to order a badge with the Dickinson Police name on it?
Yes. Metal badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Dickinson police buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. Custom or fictional department designs, and designs where you substitute your own agency name, are welcome without that step.
