Elmendorf Police Badge with Silver Eagle-Top Shield and Red-Ringed Texas Seal
Polished silver police badge for Elmendorf, Texas, die-struck as an upright eagle-top shield with a full-relief eagle crest, a laurel-wreath border down both sides and a fine pebbled field. A round seal at the center carries a red enamel ring reading STATE OF TEXAS in silver around a blue enamel disc with a silver star inside a silver laurel wreath. Silver banners read POLICE and DEPARTMENT across the upper shield and EL MENDORF, struck as two words, across the lower shield, with a silver TX plate at the base, all in black-filled lettering.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Elmendorf Police Department insignia, serving the city of Elmendorf, Texas, in Bexar County southeast of San Antonio. It is an eagle-top shield struck in polished silver with a laurel border, built around a red-ringed state seal on a blue disc, and every banner on the badge lettered in black on silver.
Shape & Base: The badge is die-struck as an upright shield with a full-relief silver eagle across the top, its wings spread over both shoulders. A laurel-wreath border runs down each side to the pointed base, and the field inside it carries a fine pebbled texture behind the seal and banners.
Center: A round seal sits at the heart of the shield with a red enamel ring reading STATE OF above and TEXAS below in silver letters, with a small silver dot at each side. Inside the ring, a blue enamel disc carries a silver five-point star inside a silver laurel wreath.
Ring & Banner Lettering: POLICE arcs across a raised silver banner beneath the eagle in large black-filled letters, with DEPARTMENT on a second silver ribbon below it. The lower banner is struck EL MENDORF, with the name split into two words as it appears on the badge, and a silver plate at the base reads TX.
Enamel & Tonal Detail: Red and blue enamel in the seal are the only bright colors on the badge. The eagle, the laurel border, the pebbled field, the banners and the plate are all polished silver, with black fill in the four lines of lettering as the only other color.
Finish Quality: Die-struck in solid metal with a polished silver plating, hand-finished so the eagle feathers and laurel leaves stay crisp and the seal lettering reads cleanly on the red ring. For another city police department in the same county, see the Converse Police badge.
Specifications
| Metal Badge | |
| Eagle-Top Shield Badge | |
| Die-Struck Metal | |
| Polished Silver | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a custom metal badge like the Elmendorf Police design?
Yes. Owl Badges produces custom die-struck metal badges for police departments, sheriff’s offices, and constable offices nationwide. You can order this silver eagle-top shield as shown or change the seal, the banner wording, and the plating to fit your own department. Badges carrying a real agency name require credential verification before production.
What is the minimum order for a police badge like this?
There is a low minimum order. Single badges are available for individual officers, and per-piece pricing drops sharply as quantity rises, which makes larger runs practical for an entire department or a promotion cycle at once.
Can the red and blue seal be changed to our own colors or seal?
Yes. The seal on this badge pairs a red lettered ring with a blue disc and a silver wreath and star, a three-color layout that reads clearly at badge scale. We can match the ring and disc to your department colors, replace the seal with your own city, county or state seal from artwork you supply, or strike the seal in a single tone with black-filled lettering.
How much does a custom metal badge like this cost?
Estimated pricing runs from about $150 each at a single piece down to roughly $50 each at higher volumes. There is no setup fee and no mold fee. Final pricing depends on the finished design, size, and quantity, and is confirmed with a free quote.
How long does production take?
Approximately 8 to 14 weeks for tooling, striking, enamel fill, plating, and finishing after your proof is approved. The red ring and blue disc are filled and leveled separately so the boundary stays sharp beneath the silver lettering, and the badge goes to polish once the fill has cured flat.
Do I need credentials to order a badge with the Elmendorf Police name on it?
Yes. Metal badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Elmendorf police buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. Custom or fictional department designs, and designs where you substitute your own agency name, are welcome without that step.
