Euless Police Badge with Silver Oval, Faceted Star and Swept Stripes
Polished silver police badge for Euless, Texas, die-struck as an upright oval with a double lined rim and a smooth untextured field. A large faceted silver five-point star fills the center with three swept stripes curving across it in relief, with no seal, map or enamel on the piece. POLICE OFFICER arcs across a raised top banner and EULESS POLICE crosses the lower oval, both in black-filled lettering, and a plate at the base reads TEXAS.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Euless Police Department insignia, serving the city of Euless, Texas, in the Mid-Cities of Tarrant County between Fort Worth and Dallas. It is an oval badge struck in polished silver with a smooth field, built around a large faceted star crossed by three swept stripes, with no seal, map or enamel anywhere on the piece.
Shape & Base: The badge is die-struck as an upright oval with a double lined rim running the full circumference. The face inside it is left smooth with no sunburst or texture, so the star and its stripes read against a plain polished ground, and a plate with curled ends closes the base.
Center: A large silver five-point star fills the middle of the oval with sharply faceted arms that catch the light on alternating planes. Three swept stripes curve across the star from the left, rising and tapering toward the right, struck in relief so they stand off the star’s face as a motion emblem rather than a seal.
Ring & Banner Lettering: POLICE OFFICER arcs across a raised banner at the top of the oval in large black-filled letters, with the banner ends folding down at each side. A second banner across the lower oval reads EULESS POLICE in the same fill, and the plate at the base reads TEXAS.
Enamel & Tonal Detail: This design carries no enamel and no state seal. Every element is polished silver separated by relief and facet alone, and the black fill in the two banners and the plate is the only color on the badge.
Finish Quality: Die-struck in solid metal with a polished silver plating, hand-finished so the star facets hold crisp edges, the three stripes stay distinct where they cross the arms and the smooth field polishes to a clean mirror. For the neighboring city police department in the same county, see the Colleyville Police badge.
Specifications
| Metal Badge | |
| Oval Badge | |
| Die-Struck Metal | |
| Polished Silver | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a custom metal badge like the Euless Police design?
Yes. Owl Badges produces custom die-struck metal badges for police departments, sheriff’s offices, and constable offices nationwide. You can order this silver oval style as shown or change the star, the stripe emblem, the rank banner, the department wording, and the plating to fit your own department. Badges carrying a real agency name require credential verification before production.
What is the minimum order for a police badge like this?
There is a low minimum order. Single badges are available for individual officers, and per-piece pricing drops sharply as quantity rises, which makes larger runs practical for an entire department or a promotion cycle at once.
Can the swept-stripe emblem be replaced with our own?
Yes. This badge uses a faceted star with three swept stripes in place of a seal, so the whole center reads through polished planes and shadow rather than color or lettering. We can strike your own emblem the same way from artwork you supply, add a small seal to the star, or keep the stripes and fill them with enamel for contrast.
How much does a custom metal badge like this cost?
Estimated pricing runs from about $150 each at a single piece down to roughly $50 each at higher volumes. There is no setup fee and no mold fee. Final pricing depends on the finished design, size, and quantity, and is confirmed with a free quote.
How long does production take?
Approximately 8 to 14 weeks for tooling, striking, plating, and finishing after your proof is approved. With no enamel on this design, the fill stage drops out entirely, and the time goes into the facets and stripes, which are cut into the die and then hand-polished after striking.
Do I need credentials to order a badge with the Euless Police name on it?
Yes. Metal badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Euless police buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. Custom or fictional department designs, and designs where you substitute your own agency name, are welcome without that step.
