Farmers Branch Police Badge with Gold Oval and Lettered Texas Map
Polished gold police badge for Farmers Branch, Texas, die-struck as an upright oval with a lined rim, X-shaped accents and a radiating sunburst field. A large raised gold outline of Texas edged in black fills the center with FARMERS and BRANCH struck across it in black fill, and there is no seal, star or emblem inside the map. Black enamel banners read POLICE OFFICER across the top and POLICE across the lower oval in gold letters.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Farmers Branch Police Department insignia, serving the city of Farmers Branch, Texas, in Dallas County between Carrollton and Addison. It is an oval badge struck in polished gold, built around a large Texas map that carries the city name across its face, with black enamel banners above and below and no seal or star on the piece.
Shape & Base: The badge is die-struck as an upright oval with a lined rim running the full circumference, small X-shaped accents at the top and sides, and a face cut as a radiating sunburst with fine lines fanning outward from behind the map. The oval closes at the base with no plate.
Center: A large raised outline of Texas fills the middle of the oval in polished gold, edged with a fine black line so it stands off the sunburst, and FARMERS and BRANCH are struck across the map on two lines in black-filled letters. There is no seal, star or emblem inside the map, so the state outline and the city name carry the whole center.
Ring & Banner Lettering: POLICE OFFICER arcs across a black enamel banner at the top of the oval in gold letters, with black ribbon ends folding back at each side. A second black enamel banner across the lower oval reads POLICE in the same gold lettering.
Enamel & Tonal Detail: Black enamel fills the two banners and edges the map, and it is the only color on the badge. The rim, the sunburst, the map and the banner lettering are polished gold, so the badge reads as gold metal with two black bands and a black-outlined map between them.
Finish Quality: Die-struck in solid metal with a polished gold plating, hand-finished so the map edge holds a clean line against the sunburst, the city name reads sharply on the map and the gold lettering sits crisply on each black banner. For the neighboring city police department in the same county, see the Carrollton Police badge.
Specifications
| Metal Badge | |
| Oval Badge | |
| Die-Struck Metal | |
| Polished Gold | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a custom metal badge like the Farmers Branch Police design?
Yes. Owl Badges produces custom die-struck metal badges for police departments, sheriff’s offices, and constable offices nationwide. You can order this gold oval style as shown or change the state map, the map lettering, the banner wording, the enamel color, and the plating to fit your own department. Badges carrying a real agency name require credential verification before production.
What is the minimum order for a police badge like this?
There is a low minimum order. Single badges are available for individual officers, and per-piece pricing drops sharply as quantity rises, which makes larger runs practical for an entire department or a promotion cycle at once.
Can our city name go on the map like this?
Yes. This badge puts the city name directly on the state map on two lines instead of on a banner, which keeps the center to a single large shape. We can strike your own city or agency name across the map, use your state outline in place of Texas, or add a small seal or star above the lettering if you want an emblem in the center.
How much does a custom metal badge like this cost?
Estimated pricing runs from about $150 each at a single piece down to roughly $50 each at higher volumes. There is no setup fee and no mold fee. Final pricing depends on the finished design, size, and quantity, and is confirmed with a free quote.
How long does production take?
Approximately 8 to 14 weeks for tooling, striking, enamel fill, plating, and finishing after your proof is approved. With black as the only enamel, the fill stage runs in a single pass across the two banners and the map edge, and the badge goes to polish once the fill has cured flat.
Do I need credentials to order a badge with the Farmers Branch Police name on it?
Yes. Metal badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Farmers Branch police buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. Custom or fictional department designs, and designs where you substitute your own agency name, are welcome without that step.
