Friendswood Police Badge with Eagle-Top Shield and Texas Seal
Two-tone eagle-top shield metal badge for the Friendswood Police Department in Galveston and Harris counties, Texas. A silver spread eagle crowns the shield above stacked gold PATROLMAN and FRIENDSWOOD banners, with silver wheat wreaths up both sides and sunburst rays behind a gold-framed State of Texas seal — dark blue ring, light blue field, silver star in a gold laurel wreath. A wide gold POLICE banner and a leaf-framed TX panel close the base.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Friendswood Police Department insignia, serving the city of Friendswood, Texas, which straddles Galveston and Harris counties between Houston and the Gulf Coast. It is a two-tone eagle-top shield pairing gold banners against a silver shield, built around a blue enamel State of Texas seal in a gold sunburst frame.
Shape & Base: The badge is die-struck as an upright silver shield crowned by a spread eagle, its wings running along the top edge and a small star at its breast. Wheat wreaths climb both sides of the shield in silver relief, and sunburst rays fan out behind the center assembly.
Center: A gold ornate sunburst frame holds a round State of Texas seal in enamel — a dark blue outer ring carrying STATE OF above and TEXAS below in light lettering, around a light blue field where a silver five-point star sits wrapped in a gold laurel wreath.
Banner Lettering: A stacked pair of gold banners crosses the upper shield — PATROLMAN on the top arc and FRIENDSWOOD beneath it — both in black-filled capitals with curled tails. Below the seal, a wide gold banner carries POLICE, and a gold leaf-framed panel at the base reads TX.
Enamel & Tonal Detail: The two blues of the state seal are the badge’s only color, set inside gold that carries every banner, frame and panel, while the eagle, wreaths, rays and shield field read in silver — the two-tone contrast doing the rest of the work.
Rank & Finish Quality: The PATROLMAN banner is fully customizable to any rank. Every element is die-struck for crisp relief, from the eagle’s feathering to the wheat wreaths, then plated in two-tone gold and silver and sealed for daily duty wear. For another design from the same county, see the Galveston County Sheriff badge.
Specifications
| Metal Badge | |
| Two-Tone Eagle-Top Shield Badge | |
| Die-Struck Metal | |
| Two-Tone Gold and Silver | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order an eagle-top shield badge like this Friendswood design?
Yes. This Friendswood Police badge crowns its silver shield with a full spread eagle, wings running the top edge, and that eagle-top format can be reproduced exactly or adapted for your own agency. The eagle’s feathering is cut into the die during tooling, so the detail holds at duty-badge size.
Can you change the rank banner and lettering on this badge?
Yes. This design is a starting point. The PATROLMAN banner takes any rank — officer, sergeant, lieutenant, chief — and our artwork team can change FRIENDSWOOD and the POLICE and TX panels to your own agency wording, swap the State of Texas seal for your state or municipal seal, and finish the badge in two-tone as shown or all gold or silver. You receive a free proof before any tooling or production begins.
What is the minimum order for a custom metal badge like this?
Metal badges carry a low minimum order, and per-piece pricing drops as quantity rises. Small runs are welcome for a single rank or unit, with sharper pricing at larger quantities for a full department order across several ranks.
How much does a custom two-tone metal badge like this cost?
Estimated pricing ranges from about $150 each at low quantities down to roughly $50 each at higher volumes. There is no setup fee and no mold fee. Two-tone plating is included in the quote, which depends on the size, plating, and quantity, and is confirmed free of charge.
How long does production take for a metal badge?
Custom die-struck metal badges take approximately 8 to 14 weeks for tooling, striking, plating, enamel fill, and finishing after your proof is approved. Your design is confirmed before production starts, so there are no surprises.
Do I need credentials to order a Friendswood Police badge?
Yes. Metal badges bearing a real agency name such as the Friendswood Police Department are sold only to that agency or its authorized representatives. Public-safety buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production. Custom or renamed designs for your own department are welcome without that step.
