Liberty County Constable Precinct 2 Badge with Crossed US and Texas Flags and Gold Star-in-Ring
Polished gold constable badge for Liberty County, Texas, Precinct 2, built as a five-point star set inside a circular ring, with sharp faceted star points rather than ball tips and laurel sprays struck in relief at both sides of the ring. LIBERTY COUNTY arcs across the top of the ring in black-filled letters and CONSTABLE across the bottom, with the precinct split across two small side tabs reading PCT and 2. An upper banner carries the constable name and the badge number sits below the seal. The center holds a fully tonal gold seal reading THE STATE OF TEXAS around a wreathed gold star, and a crossed pair of enamel United States and Texas flags sits below it.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Liberty County Constable’s Office insignia, serving Precinct 2 of Liberty County, Texas, northeast of Houston with the county seat at Liberty. It is a five-point star-in-ring badge struck in polished gold, carrying a fully tonal State of Texas seal and a pair of crossed enamel flags below it.
Shape & Base: A five-point star is die-struck in polished gold and set inside a circular ring, with sharp faceted points rather than the rounded ball tips used on most badges in this gallery. The upper point rises clear above the ring and the side points reach its inner edge, and laurel sprays are struck in gold relief at the left and right of the ring.
Center: A circular seal sits at the heart of the star with THE STATE OF TEXAS arcing around its upper border, framing a gold star inside a gold laurel wreath. The whole seal is rendered tonally in gold with no enamel fill, so it reads entirely through relief against the star face behind it.
Ring & Banner Lettering: LIBERTY COUNTY arcs across the top of the outer ring in black-filled letters and CONSTABLE across the bottom. The precinct is split across two small tabs set into the ring at either side, PCT on the left and 2 on the right. An upper ribbon banner carries the name of the serving constable, JOHN G. TUCKER, and the badge number 3C20 sits below the seal.
Enamel & Tonal Detail: The only enamel on this badge is the pair of crossed flags below the seal, the United States flag angled to the left and the Texas flag to the right, meeting at a gold knot where the staffs cross. With the seal struck tonally and every legend filled in black, that small crossed pair carries all the color on the face.
Finish Quality: Die-struck in solid metal with a polished gold plating, hand-finished so the faceted star points hold their edges and the tonal seal keeps its definition without enamel to separate it. For a related gold star-in-ring that sets its flags as ring panels instead, see the Hood County Constable Precinct 2 badge.
Specifications
| Metal Badge | |
| Five-Point Star-in-Ring Badge | |
| Die-Struck Metal | |
| Polished Gold | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a custom metal badge like the Liberty County Constable Precinct 2 design?
Yes. Owl Badges produces custom metal badgees for agencies, departments, and organizations nationwide. You can order this style as shown or customize the colors, text, emblem, size, and border to fit your own agency. There is no setup fee and no minimum-quantity barrier — request a quote to get started.
What is the minimum order for a metal badge like this?
There is a low minimum order, with quantity-break pricing that starts as low as 10 pieces. Smaller runs are welcome for new departments or specialty units, and per-piece pricing drops sharply at 100, 250, 500, and 1,000 units.
Can you change the colors, text, or size on this design?
Yes. This design is a starting point. Our artwork team can adjust the emblem, lettering, colors, shape, border, and dimensions to fit your department. Submit your changes with a quote request and you will receive a free proof before any production begins.
How much does a custom metal badge like this cost?
Estimated pricing ranges from about $17 each at 10 units down to roughly $2 each at 1,000 units. There is no setup fee and no mold fee. Final pricing adjusts based on the final design, size, and quantity, and is confirmed with a free quote.
How long does production take?
Custom embroidered metal badgees take approximately 3 to 6 weeks for production and finishing after your proof is approved. Your design is confirmed before production begins, so there are no surprises.
Do I need credentials to order a metal badge with a real agency name on it?
Yes. metal badgees bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. Custom or fictional department designs, and designs where you change the name to your own, are welcome without that step.
