Maverick County Constable Badge with Black Enamel Texas Seal and Antique Gold Cut-Out Star
Antique gold constable badge for Maverick County, Texas, built as a five-point star set inside a broad flat ring with the areas between the star arms and the ring pierced right through. The star is set point-down, with two arms flanking a notch at the top, two at the mid-flanks, and a single point reaching straight down at the base, and engraved leaf-and-scroll motifs run along every arm. CONSTABLE arcs across the top of the ring and COUNTY across the bottom, with two small black stars at the sides and ribbon banners reading MAVERICK and COUNTY. The center holds a black enamel ring with THE STATE OF TEXAS in gold around a wreathed gold star.
Low MOQ
Low Minimum Order
Artwork
Artwork Design Team
Company
USA Since 1999
Factory
Direct
Description
This metal badge features the Maverick County Constable’s Office insignia, serving Maverick County, Texas, on the Rio Grande at the Mexican border with the county seat at Eagle Pass. It is a cut-out star-in-ring badge struck in antique gold, carrying a black enamel State of Texas seal and a star set point-down.
Shape & Base: A five-point star sits inside a broad flat ring with the areas between the star arms and the ring pierced right through. The star is set point-down rather than point-up, with two arms flanking a notch at the top, two at the mid-flanks, and a single point reaching straight down at the base. Engraved leaf-and-scroll motifs are worked along every arm.
Center: A circular black enamel ring sits at the heart of the star, carrying THE STATE OF TEXAS in gold lettering with a dashed border running around both edges. Inside it, a gold star is framed by a gold laurel wreath, with small diamond accents at either side and a cross accent struck below the wreath.
Ring & Banner Lettering: CONSTABLE arcs across the top of the outer ring in black-filled letters and COUNTY across the bottom, with two small black stars set on the ring at the left and right. A ribbon banner above the seal reads MAVERICK and a second below it reads COUNTY, so the county name is carried on the banners and echoed on the ring.
Enamel & Tonal Detail: The antique gold plating leaves the recessed areas darkened while the raised surfaces come back up warm, which gives the badge an aged appearance rather than the bright finish used on most designs in this gallery. Black enamel is confined to the seal ring, the ring lettering, and the two small ring stars.
Finish Quality: Die-struck in solid metal with an antique gold plating, hand-finished so the pierced edges stay clean and the engraved scrollwork holds the darkening in its recesses. For a closely related cut-out design with the same black enamel seal, struck in polished gold with a scalloped rim, see the Johnson County Constable Precinct 4 badge.
Specifications
| Metal Badge | |
| Cut-Out Star-in-Ring Badge | |
| Die-Struck Metal | |
| Antique Gold | |
| 2.5" - 3.5" | |
| Pin-Back with Safety Clasp | |
| Individually Boxed |
Estimated pricing: 1 → $150 · 10 → $80 · 20 → $60 · 50 → $50 · 100 → $45 · 200 → $40 each
No setup fee · No mold fee. Estimate only — final price adjusts by design, size, and quantity, and is confirmed with a free quote. No payment until you approve your proof.
🛡 Authorized Purchase & Credential Verification
Badges bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers must provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. We do not sell agency-named badges for personal use.
Custom and fictional designs — for example, a made-up department like “Town of Western Hope Police” — are welcome, as are designs where you change the agency or department name to your own.
Frequently Asked Questions
Can I order a custom metal badge like the Maverick County Constable design?
Yes. Owl Badges produces custom metal badgees for agencies, departments, and organizations nationwide. You can order this style as shown or customize the colors, text, emblem, size, and border to fit your own agency. There is no setup fee and no minimum-quantity barrier — request a quote to get started.
What is the minimum order for a metal badge like this?
There is a low minimum order, with quantity-break pricing that starts as low as 10 pieces. Smaller runs are welcome for new departments or specialty units, and per-piece pricing drops sharply at 100, 250, 500, and 1,000 units.
Can you change the colors, text, or size on this design?
Yes. This design is a starting point. Our artwork team can adjust the emblem, lettering, colors, shape, border, and dimensions to fit your department. Submit your changes with a quote request and you will receive a free proof before any production begins.
How much does a custom metal badge like this cost?
Estimated pricing ranges from about $17 each at 10 units down to roughly $2 each at 1,000 units. There is no setup fee and no mold fee. Final pricing adjusts based on the final design, size, and quantity, and is confirmed with a free quote.
How long does production take?
Custom embroidered metal badgees take approximately 3 to 6 weeks for production and finishing after your proof is approved. Your design is confirmed before production begins, so there are no surprises.
Do I need credentials to order a metal badge with a real agency name on it?
Yes. metal badgees bearing a real agency or department name are sold only to that agency or its authorized representatives. Law enforcement and public-safety buyers provide proof of occupation, valid credentials, or an authorized purchasing letter before production begins. Custom or fictional department designs, and designs where you change the name to your own, are welcome without that step.
